Systems That Monitor Sensor Cable Status and Alarm/Alert in the Event of Leaks
Naftosense hydrocarbon leak detection systems for the oil & gas industry are engineered for the harshest environments and installed in various settings in hazardous and non-hazardous areas. Installations include underground or above-ground structures and myriad applications, such as tank farms, underground storage tanks, pipelines, transfer lines, process units, and airports.
Naftosense Control Panels and Monitoring Devices provide the supervision to Naftosense leak detection cable for fast, reliable, and precise detection of the presence of unwanted hydrocarbons.
Features and Benefits
- Extremely long range of leak detection circuit monitoring
- Modular design for easy assembly and integrating additional components
- Adjustable alarm threshold
- Stand-alone controls for remote installations
- Din rail mounted, low voltage control options to fit in existing control and power enclosures
- Made-to-order options available on all standard controls offerings
- 10-year warranty
Communication Made Easy
Utilize your existing network when integrating a Naftosense leak detecting system. Compatible with any wireless and wired system via a host of standard communication protocols:
- 0-5V
- 0-10V
- 4-20mA
- Dry Contact
- Modbus RTU (RS-485)
- TCP/IP (with protocol converter)
Control Panels
FLD-TSP10 & FLD-TSP7 Monitoring Panels
The FLD-TSP10 is a high performance 10-inch touch screen leak detection controller. The FLD-TSP7 is a high performance 7-inch touch screen leak detection controller. Rated for IP54/NEMA 3S outdoor environments, these rugged three zone controllers can communicate efficiently with over 2 miles of distributed network of leak detection cables and 75 monitoring modules (25 per zone maximum). Requires 100-240VAC or 24VDC power supply.
Compatible With: All Naftosense sensor cable and point sensors.
Sensors must be connected to either MXM or FBS Sensor Monitoring Modules.
FLD-SMP-MB Control Module for Long Line Leak Detection
The FLD-SMP-MB offers the high-performance control module designed to be DIN rail mounted in your NEMA rated enclosure! FLD-SMP-MB Long range control Module capable of running up to 50 Monitoring Modules and up to 2.5 miles of sensing cables. Requires 24VDC power supply.
Compatible With: All Naftosense sensor cable and point sensors.
Sensors must be connected to either MXM or FBS Sensor Monitoring Modules.
FLD-SMP-MB-420 ERBUS-compatible Control Module for Polar Solvents Leak Sensors
The FLD-SMP-MB-420 is a high-performance controlling module designed for Polar Solvents or Hydrocarbon leak sensors. DIN rail mounting in your existing or new enclosure. Specially designed to interface with ERBUS proprietary communications and low voltage power to related monitoring modules. Maximum distance covered with wired layout (sensor and jumper) is up to 1 mile.
FLD-SSMH-DS Control Module for Single Sensor Leak Detection
The FLD-SSMH-DS is designed for smaller leak detection applications where a single sensor under 100 ft is used. The DIN rail mounted controller is ready to be mounted in your NEMA rated enclosure. Requires a 12 or 14 VDC power Supply.
Compatible With: All Naftosense sensor cable and point sensors under 100 ft long.
Independent stand-alone control and monitoring device.
Monitoring Devices Used With Control Panels
FLD-FBS Sensor T-Branch Monitoring Module
T-Branch monitoring module designed to monitor up to 8 sensor cables and provide ERBUS proprietary communications back to Naftosense Control panels. NEMA4X field mountable enclosure. Power supplied via ERBUS (12 to 20 VDC power supply).
Compatible With: All Naftosense sensor cable and point sensors.
Designed to be used with FLD-TSP7 or FLD-SMP-MB control panels.
FLD-MXM Multiplexed Monitoring Module
Designed to monitor "long line" applications of sensor cables. MXM can monitor up to 16 sensor cables and provide ERBUS proprietary communications back to Naftosense Control panels. NEMA4X field mountable enclosure. Power supplied via ERBUS (12 to 20 VDC power supply).
Compatible With: All Naftosense sensor cable and point sensors.
Designed to be used with FLD-TSP7 or FLD-SMP-MB control panels.
FLD-MXM-PS ERBUS-compatible Acquisition Module with Intelligent Thresholding
Designed for reliable detection and location of unwanted presence of polar solvents such as alcohols, ethanol, acetone/MEK, etc. It can also be used to detect hydrocarbon liquids and their vapors. Controlled through the Evteam ERBUS proprietary field bus allowing reliable communication over distances exceeding 2 miles (3.2 km). Module provides the leak alarm level allowing adjustable thresholding from the associated monitoring panel.
Monitoring Devices Used With 3rd Party Transmitters
FLD-F4RTD Stand Alone Battery Powered Monitoring Module
Variable resistance output, self-powered Monitoring Module for remote monitoring up to 4 individual sensor cables. NEMA 4X enclosure, battery powered, stand-alone, hazardous location device designed for long term deployment. Agnostic communication output via PT100, 0-5V, or 0-10V outputs.
Compatible With: All Naftosense sensor cable and point sensors.
Designed to be used with your favorite brand of hard wired or wireless temperature transmitters. Pt-100 RTD emulated output.
