FLD-PHD Hydrocarbon Sensor Cable

The FLD-PHD is a sensor designed to detect a wide range of hydrocarbons. Designed for horizontal applications this flexible sensor is suitable for both above and below ground deployment. With a maximum sensor length of 80' you can cover smaller areas with this configure-to-order rope style sensor. With up to 1000' of lead wire you can easily monitor smaller assets. The FLD-PHD sensor cable is offered as stand-alone sensor connected in factory with 10 ft (3 m) direct-burial/UV-resistant leader cable. On request, the length of the leader cable can be extended up to 1000 ft (300 m).

The sensor is specially engineered for reliable operation at very low temperatures and is suitable for polar applications. It is fully sealed and not affected by permanent immersion in water, year after year. The length of the sensing section is limited to 50 ft (15 m). The semi-conductive sensor material is extremely durable and can withstand exposure to temperatures in excess of 212°F (100°C). The sensor cable is fully passive, anti-termite and anti-rodent and can be used in sealed/buried applications.

When used for applications in hazardous areas, the sensor cable will be wired to an intrinsically-safe sensor box, or alternatively through a Zener barrier to a sensor module installed in the safe zone. Please contact Naftosense for additional information.

Features and Benefits

  • Reliable detection of all fuels, oils, solvents, and specialty hydrocarbon blends
  • Reusable after contamination
  • Volumetric leak alarms dynamically show sensor contamination level. Decipher old and new material leakage.
  • Insensitive to vibrations, methane, water
  • UV Rated outer jacket safe for continuous exposure to sun light
  • Wide operating temperatures range
  • Reduced maintenance and easy troubleshooting
  • 10-year warranty

Typical Applications

  • Liquid hydrocarbon leak detection in tank farms, terminals, refineries, and pipelines
  • Detection of leaking fuel from airport hydrant systems, military, and custody transfer stations in harsh outdoor, demanding environmental conditions
  • Monitoring of diesel generators, fuel storage tanks in commercial buildings, hospitals, data centers, etc.
  • Monitoring of oil-filled power transformers, combustion turbines, pumps, filters, heat exchangers, etc.

Agency Approvals

  • In the US: Simple element, Intrinsically safe - Class I, Division 1, Groups A, B, C and D, Class I, Zone 0, AEx ia IIC
  • Atex: Simple element, Intrinsically safe - II 1 G, Ex ia IIC Gb T4
  • IECEx: Simple element, Intrinsically safe - Ex ia IIC Gb T4

TECHNICAL INFORMATION

Typical Detection Time at 68°F (20°C)
Unleaded Gasoline 1 minute 20 seconds
Diesel/Jet Fuel 2 minutes
Light Crude Oil 6 to 8 minutes
Heavy Crude Oil, Dilbit 12 to 16 minutes
Motor/Silicone Oil 16 to 19 minutes
Bunker C Oil 45 to 55 minutes

Sensor Cable Construction and Typical Application

FLD-PHD Typical Application


Technical Data
Operating Life 30+ years at 104°F (40°C) - 10-year warranty
Weight 0.044 lb / ft (120 g / m)
Fire Rating Non-flame propagating
Ingress Rating IP68 - suitable for outdoor/direct burial
Operating Temperature Range -67°F to 212°F (-55°C to 100°C)
Recommended Maximum Section Length 50 ft (15 m)
Hazardous Locations Classification IS/ I/ 1/ ABCD/ T4 ; I/ 0/ AEx/ ia IIC T4 ; Class I, Zone 0, Ex ia T4 Class I, Div. 1, Groups A,B,C,D; T4 II 1 G Ex ia IIC T4 Ga
Warranty 10 years

Attention! The sensor cable FLD-PHD can only be used with sensor modules manufactured by Nafotsense. Other applications will lead to unpredictable performance and unexpected results. For performance metrics, please contact Naftosense.

Product Codes
FLD-PHD-10 Sensor cable for hydrocarbon fluids - 10 ft (3 m) sensor with 10 ft (3 m) leader cable
FLD-PHD-25 Sensor cable for hydrocarbon fluids - 25 ft (7.6 m) sensor with 10 ft (3 m) leader cable
FLD-PHD-50 Sensor cable for hydrocarbon fluids - 50 ft (15 m) sensor with 10 ft (3 m) leader cable

Custom lengths for both sensor and leader sections are available from Naftosense. Please consult for pricing options.

Have a Product or Application Question?

Fill out this form and a Naftosense Representative will contact you.

*Your Name 
*Company or Organization 
*Phone Number 
*Email Address 
*Question 
  * Required Field
 
 

The information specified in this form is used only to provide the services you request. We never sell or share this personal information with third parties.

consent banner