The FLD-SSMH-DS is designed for smaller leak detection applications where a single sensor under 100 ft is used. The DIN-rail mounted controller is ready to be mounted in your NEMA rated enclosure. The maximum sensor length is limited to 100ft/30m per FLD-SSMH.
For hazardous locations applications, the sensor cable FLD-HSC or FLD-O2W-SP sensor probe will be wired to the sensor module through a Zener barrier, with FLD-SSMH module installed in an area approved enclosure.
Please contact Naftosense for additional information.
Features and Benefits
- Detects reliably all North-American crude oils at very low temperatures
- Real-time transmission of cable contamination
- Dynamic tracking of the sensor contamination
- Adjustable alarm threshold
- Very wide operating temperatures range
- Able to detect the vapors diffused in the soil after spill from underground pipes
- 10-year warranty
Typical Applications
- Leak detection in Oil & Gas facilities
- Detection of leaking fuel from airport hydrant systems, military, and custody transfer installations in harsh outdoor, demanding environmental conditions
- Leak detection in refineries, tank farms, mainline pipe sections, or repair sites
- Leak detection in refineries, tank farms, block valves, mainline pipe sections
- Leak detection in downstream and fuel retail facilities
Communication Made Easy
Utilize your existing network when integrating a Naftosense leak detecting system. Compatible with any wireless and wired system via a host of standard communication protocols:
- 0-10V
- 4-20mA
- Dry Contact
- Modbus RTU (RS-485)
- TCP/IP (with protocol converter)
Agency Approvals
- Class 2 device, tested for compliance with ANSI/UL 61010-1
TECHNICAL INFORMATION
| Typical Detection Time at 68°F (20°C) with FLD-HSC Sensor Cable | |
| Unleaded Gasoline | 1 minute 20 seconds |
| Diesel | 2 minutes |
| Jet Fuel | 2 minutes |
| WTI/WTS | 6 to 7 minutes |
| Dilbit AWB | 11 to 12 minutes |
| Bunker C oil | 45 to 55 minutes |
| Technical Data | |
| Dimensions | 1.42" x 3.35" x 2.28" (36 x 85 x 58 mm) - 2-module DIN |
| Weight | 0.5 lb. / (225 g) |
| Fire Rating | UL94-HB |
| Ingress Rating | Panel: IP10/NEMA 1 - indoor use only |
| Operating Temperature Range | -13°F to 149°F (-25°C to 65°C) |
| Power Supply Voltage Range | 12 - 24 VDC Class 2 Circuit / 24 VDC only for FLD-SSM-H420 |
| Battery Operating Life | 10 years minimum |
| Maximum Length of Cable | Sensor Cable FLD-HSC: 100 ft (30 m) Leader Cable (AWG22 min): 1000 ft (300 m) |
| Power Consumption | 80mA maximum |
| Mounting | DIN-rail mounted inside electric cabinet or suitable enclosure |
| Warranty | 10 years |
Attention! FLD-SSM panel is approved by accredited certification organization for worldwide safe use in both residential and industrial environments. For additional information, please contact Naftosense.
| Product Codes | |
| FLD-SSM-HR2 | Monitoring module for a single passive sensor cable or probe for detecting non-polar liquids, with 2 SPDT relays outputs |
| FLD-SSM-HMBR2 | Monitoring module for a single passive sensor cable or probe for detecting non-polar liquids, with Modbus RTU and 2 SPDT relay outputs |
| Monitoring module for a single passive sensor cable or probe for detecting non-polar liquids, with 3-wire current loop 4-20mA output and 2 SPDT relay outputs | |
| Monitoring module for a single passive sensor cable or probe for detecting non-polar liquids, with 0-10V output and 2 SPDT relay outputs | |